HYDROGEN PEROXIDE WATER TREATMENT SYSTEM



Placeholder image

Call 1-888-213-1667 to find out which system meets your needs.

Or email us any question you have at contact@mnmwater.com.

Hydrogen Peroxide water system is effective in neutralizing and removing Iron Reducing Bacteria (IRB), Sulfate Reducing Bacteria (SRB), iron, manganese and hydrogen sulfide gas. Plus, it neutralizes coliform bacteria and Tannin.

Hydrogen peroxide is a strong oxidizer and can quickly eliminate the odors. Unlike chlorine however, hydrogen peroxide leaves behind no trace of chemical by-products. When hydrogen peroxide is injected into water, a large amount of dissolved oxygen is released and a strong oxidizing effect takes place. Odors are eliminated, microorganisms are destroyed, and tannins can be oxidized.

Hydrogen peroxide converts Iron Reducing Bacteria (IRB), Sulfate Reducing Bacteria (SRB), iron, manganese and hydrogen sulfide gas to a solid particles which is then removed by a back-washing self-cleaning iron and carbon filtration system. And any residual hydrogen peroxide will be effectively removed by the carbon filter.

  • The hydrogen peroxide concentration will be adjusted by the percentage control on the chemical feed pump as required to provide proper disinfection in your water supply
  • hydrogen peroxide concentration injection from 0 -16 gallons per day by the chemical feed pump the typical setting is from .5 ppm to 60 ppm or higher based on the bacteria level in your water supply
  • Available hydrogen peroxide solution tanks in 15 & 35 gallon c/w child resistant enclosure with easy to read gallons /litres scale
  • Retention/contact tanks are required for the proper contact time that provides hydrogen peroxide disinfection, usually a 40-60 gallon retention tank is required which allows 3-5 minutes of contact time.
  • If higher flow rates are required you must add additional retention/contact tanks

Dropdown content#1

Dropdown content#2



Copyright © 2015-2020 · All Rights Reserved · www.mnmwater.com